DIY Butt-Saver
I designed my own simple gadget to pull that last string when it’s too short to reach the tension head. Go to a hardware store and purchase one ½-inch by 1½-inch bolt, two ½-inch washers, and two ½-inch nuts. Drill a 1/8-inch hole in the middle of the bolt. Assemble it as shown in the illustration. Put the end of the short string through the hole from one direction, and a scrap piece of string through the hole from the other direction, and tighten the nut.
5 packs of Unique Tourna Grip (3 overgrips per pack) to:
Ron Condio, Ashville, NY
RSI magazine search
RSI magazine articles
RSI magazine categories
- Ask the Experts
- Associations
- Awards
- Ball Machines
- Balls
- Business/Marketing
- Clothing
- Courts/Lighting
- Education
- Footwear
- Frames
- Grips
- Industry News
- Media
- Miscellaneous
- Our Serve
- Peoplewatch
- Playtests
- Racquetball
- Review
- Reviews
- Science
- Squash
- Stringing
- Stringing Machines
- Strings
- Tennis
- Tips and Techniques
- Tournaments/Events
- Your Serve
RSI magazine archives
- August 2008
- July 2008
- June 2008
- May 2008
- April 2008
- March 2008
- February 2008
- January 2008
- November 2007
- September 2007
- August 2007
- July 2007
- June 2007
- May 2007
- April 2007
- March 2007
- February 2007
- January 2007
- November 2006
- September 2006
- August 2006
- July 2006
- June 2006
- May 2006
- April 2006
- March 2006
- February 2006
- January 2006
- November 2005
- September 2005
- August 2005
- July 2005
- June 2005
- May 2005
- April 2005
- March 2005
- February 2005
- January 2005
- November 2004
- October 2004
- September 2004
- August 2004
- July 2004
- June 2004
- May 2004
- April 2004
- March 2004
- February 2004